Please Note:

US:Alaska, Hawaii, and Puerto Rico
The above regions are unable to ship.
Please consult customer service before placing an order

📦Space-Saving & Wall-Mountable

At just 22.83 × 14.13 × 5.0 inches and weighing 35.05 lbs, this unit is 60% smaller than traditional separated systems. One person can easily hang it on the wall or tuck it into your RV—no heavy lifting or special brackets required.

⚡️Split-Phase & Single-Phase All-in-One

Native support for 120V/240V split-phase (perfect for North American panels) and standard single-phase. With 8000W continuous output, it powers your central AC, well pump, kitchen appliances, and workshop tools simultaneously without breaking a sweat.

🔧3-in-1 Integrated System

Why buy three separate boxes? This unit combines an 8kW pure sine wave inverter, a 10kW MPPT solar charger, and a 160A battery charger into one sleek chassis. Less wiring, fewer failure points, and significantly lower installation costs.

☀️Dual Independent MPPT Trackers

Equipped with two separate MPPT controllers supporting up to 10,000W solar input. Connect panels facing different directions or dealing with partial shading—each tracker operates independently to harvest every available watt, boosting overall yield by 15–25%.

🚦≤10ms UPS-Level Switchover

Grid went down? This unit switches to battery power in under 10 milliseconds—fast enough to keep your computers, routers, and medical devices running without interruption. Plus, it supports battery-less operation, running on solar + grid pass-through even if your battery bank is offline.

💡4 Smart Charging Modes + Time-of-Use Scheduling

Choose from Solar-only, Grid-priority, Solar-priority, or Hybrid charging. Program the unit to charge during cheap off-peak hours and discharge during peak rate periods—helping you slash your annual electricity bill by over 30%.

🛡️21 Built-In Safety Protections

From over-voltage and over-current to anti-islanding and reverse polarity, 21 layers of hardware and software safeguards keep your system bulletproof. The intelligent variable-speed fan runs quietly (≤60dB) —quieter than normal conversation, so it won't disturb your sleep at night.

🔗Scalable 6-Unit Parallel Expansion

Start with one unit and scale up to 6 units in parallel as your needs grow, delivering a massive 48kW total output. No need to replace your existing equipment—just add more units for a modular, future-proof power solution.

Universal Battery Compatibility + Remote Monitoring

Fully compatible with GEL/SLD/FLD lead-acid, LFP (LiFePO₄), and NCM lithium batteries with user-adjustable parameters. Standard USB, RS485, and CAN ports included. Add the optional WiFi/GPRS module for real-time monitoring via smartphone APP—check your solar yield and battery status from anywhere.

🖥️User-Friendly LCD Display

The built-in LCD screen shows real-time input/output data, battery SOC, load percentage, and fault codes at a glance. No app or laptop needed for routine checks—perfect for quick on-site diagnostics.

📢Ultra-Quiet Operation

At just ≤60dB, this unit runs quieter than a typical dishwasher or conversation. The smart fan adjusts its speed based on temperature—near-silent during low-load nighttime hours for peaceful RV camping or bedroom-adjacent installations.

📜UL1741 & FCC Class B Certified

Safety and EMC compliance you can trust. UL1741 ensures safe grid-tie connection and anti-islanding protection; FCC Class B certification guarantees home-friendly electromagnetic interference levels—safe for sensitive electronics and medical devices.